EPIC International - E-Mail US!!!
[ Home ] [ Aerators ] [ Mixers ] [ Screw Pumps ] [ Flight Deks ] [ Inquiry ]

AERATORS
Models and Dimensions

Specifications

Motors - 60 Hz & 50 Hz
  • Cast Iron frame, severe chemical duty, TEFC, aerator motor
  • Oversized stainless steel shafts
  • B-10, 100,000 hour high thrust oversized bearings
  • Non-hygroscopic copper windings
  • Class "F" insulation
  • 1.15 service factor at 40° C ambient
  • Labyrinth seals
  • Stainless steel motor mounting with machined flanges
 EPIC's 60Hz and 50Hz Aerator Motors
SS
Model		 Size
HP		 RPM DIMENSIONS (inches) APPROX.
WEIGHT
(lbs)
A C D d
               
1-1800 1 1800 48 12 10 5 352
2-1800 2 1800 48 12 10 5 352
3-1800 3 1800 48 12 10 5 352
5-1800 5 1800 60 12 10 6 602
7.5-1800 7.5 1800 60 12 10 6 602
10-1800 10 1800 60 12 10 6 602
15-1800 15 1800 72 12 12 6 870
20-1800 20 1800 72 12 12 6 870
25-1800 25 1800 72 12 12 6 870
               
10-1200 10 1200 72 12 12 6 870
15-1200 15 1200 72 12 12 6 870
20-1200 20 1200 84 15 12 7 1483
25-1200 25 1200 84 15 12 7 1483
30-1200 30 1200 96 15 25 7 1940
40-1200 40 1200 96 15 25 7 1940
50-1200 50 1200 96 15 25 7 1940
60-1200 60 1200 108 16 25 8 2622
75-1200 75 1200 108 16 25 8 3026
               
40-900 40 900 96 15 25 7 1940
50-900 50 900 108 16 25 8 2622
60-900 60 900 108 16 25 8 2622
75-900 75 900 116 16 25 8 3026
               

Other dimensions are available. Dimensions may vary depending on application.

Environmental Products for Innovative Conservation

E-Mail US!!!
E-mail us at Try@EPICIntl.com

[ Home ] [ Aerators ] [ Mixers ] [ Screw Pumps ] [ Flight Deks ] [ Inquiry ]
This page last updated on 10/16/01

If you experience any problems while visiting our site,
please notify our Web Site Manager
Site Designed and Hosted by
Global Web Solutions, Inc.
a Virginia Corporation